X

Sphinx and SOQUEM continue to intersect stratiform and near surface zinc from the Calumet-Sud Project, Quebec, including 13.1% zinc over 1.0 m within 3.8% zinc over 5.0 m

Montréal, March 20, 2018 – Sphinx Resources Ltd. (“Sphinx” or the “Corporation”)
(TSX-V: SFX) and its partner SOQUEM are pleased to announce the results from the remaining nine (9) holes from the 11-hole diamond drilling program completed earlier this year on the Calumet-Sud project in Quebec. The results include 13.1% zinc over 1.0 m in hole CS-18-02 within a stratiform and shallow-dipping mineralized horizon that graded 3.8% zinc over a 5.0 m length beginning at a depth of 15 metres. This is in addition to hole CS-18-07 that returned 6.6% zinc over 1.4 m within 3.0% zinc over a 6.8 m length beginning at a depth of 18 m and to hole CS-18-06 that returned 9.0% zinc over
1 m within 3.1% zinc over a 6.4 m length beginning at a depth of 15.6 m (see press releases of February 22 and March 6, 2018).

Tables 1 and 2 (below) present the summary results and mineralized intervals. ( Figure 1 attached) provides the geographical information including the 2014 and 2017 surface sampling results from trenches and stripped areas for the Sonny Zone. At the Sonny West Zone, hole CS-18-09 intersected the mineralized horizon that graded 1.7 % zinc over 2.7 m length beginning at a depth of 15 metres. The other two (2) holes intersected a karstic barren breccia that truncates the mineralized horizon. Based on outcrop measurements taken on the mineralized bands and drill holes orientation, the true thickness is estimated to range from 91% to 100% of the drilled length.

Beyond the area of this drilling, the horizons can be traced over a 1.5 km strike length on the basis of strongly anomalous zinc values in soils and limited drilling conducted by Sphinx and SOQUEM in 2017 (see press releases dated July 13, 2017, February 22, 2017 and December 20, 2016).

Table 1 – 2018 Drill hole assay results. Length weighted composite intervals.

 

Hole
name
From
(m)
To
(m)
Drilled width
(m)
Estimated true width (m) Zinc
%
Horizon name
CS-18-01 7.70 14.40 6.70 6.70 2.74 Sonny
inc. 9.00 11.36 2.36 2.36 5.66
CS-18-02 14.00 19.00 5.00 5.00 3.81 Sonny
inc. 16.00 17.00 1.00 1.00 13.05
CS-18-03 14.00 19.20 5.20 5.20 0.75 Sonny
CS-18-04 20.00 25.00 5.00 5.00 0.51 Sonny
CS-18-05 25.50 32.00 6.50 6.50 1.11 Sonny
CS-18-06* 15.60 22.00 6.40 6.40 3.13 Sonny
inc. 17.00 18.00 1.00 1.00 9.02 Sonny
CS-18-07* 18.00 24.80 6.80 6.60 2.99 Sonny
inc 22.75 24.10 1.35 1.31 6.63
CS-18-08 28.00 38.23 10.23 9.97 1.17 Sonny
CS-18-09 10.00 18.00 7.70 7.00 0.94 Sonny West
inc. 15.00 17.70 2.70 2.46 1.72
CS-18-10 No significant mineralization, barren karstic breccia Sonny West
CS-18-11 No significant mineralization, barren karstic breccia Sonny West

*Previously reported

 

The zinc-bearing horizon is defined by the presence of massive sphalerite bands ranging from one centimetre to several centimetres in thickness, as well as disseminated sphalerite, pyrite and pyrrhotite, all hosted in dolomitic marble. The drill hole results suggest that the shallow dipping mineralized horizon trends northwest-southeast and remains open in both directions of the drilled area. Sphinx and SOQUEM are planning a follow-up exploration program that will focus on drilling the mineralized horizon to further establish its continuity and mineral resource potential. The program is likely to begin in the spring.

 

Analytical protocol

Samples were analyzed by ALS in Val-d’Or, Quebec. The analytical process consisted of crushing, splitting and assaying using sodium peroxide digest finish with ICP AES finish. Sphinx applies industry-standard QA/QC procedures to the program.

Qualified Persons

The drilling program was managed by Sphinx under the supervision of
Normand Champigny and under the field direction of Michel Gauthier, Ph.D. (géo, and Board member of the Corporation) who are Qualified Persons under National Instrument 43-101. This press release was prepared by Normand Champigny, Qualified Person for Sphinx.

About SOQUEM

SOQUEM, a subsidiary of Ressources Québec, is a leading player in mineral exploration in Québec. Its mission is to explore, discover and develop mining properties in Québec. SOQUEM has participated in more than 350 exploration projects and contributed to major discoveries of gold, diamonds, lithium and other minerals.

About Québec and Sphinx

Quebec has established itself as one of the world’s most attractive mining jurisdictions, ranking 6th globally (Fraser Institute press release, February 22 2018). The Quebec government has created market confidence by following a proactive approach to mining policy. Quebec’s mining sector has also been encouraged by the clarity and certainty of the legal and regulatory framework adopted by its government. Sphinx is engaged in the generation and acquisition of exploration projects in Québec.

 

For further information, please consult Sphinx’s website or contact:

Normand Champigny
President and Chief Executive Officer
514.979.4746
info@sphinxresources.ca
sphinxresources.ca

 

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

This press release may contain forward-looking statements that are subject to known and unknown risks and uncertainties that could cause actual results and activities to vary materially from targeted results and planning. Such risks and uncertainties include those described in Sphinx’s periodic reports including the annual report or in the filings made by Sphinx from time to time with securities regulatory authorities.

 

Table 2 – 2018 Drill hole location information

 

Hole
name
East North Elevation

(m)

Length

(m)

Azimuth

True North

(degrees)

Dip

(degrees)

CS-18-01 369241 5059606 137.75 28.08 270 -75
CS-18-02 369243 5059629 137.00 32.65 270 -75
CS-18-03 369220 5059628 137.50 60.00 270 -60
CS-18-04 369238 5059659 137.00 33.40 270 -50
CS-18-05 369273 5059626 137.00 44.00 270 -75
CS-18-06* 369265 5059595 138.00 27.11 270 -75
CS-18-07* 369267 5059571 138.00 36.30 270 -90
CS-18-08 369291 5059589 139.40 47.00 270 -90
CS-18-09 368858 5059886 135.60 47.50 230 -50
CS-18-10 368814 5059918 128.70 75.50 210 -50
CS-18-11 368770 5059923 121.80 25.40 220 -50

*Previously reported